Tutorials

manima technologies

tutorials

Tutorial 14 - Installing the MaNima HMI Touchscreen

In this tutorial there will be an explanation about how to install the MaNima HMI Touchscreen.

Tutorial 13 - Inputs and outputs

In this tutorial there will be an explanation about the inputs and outputs of the MaNima Pollux. 

Tutorial 12 - Current and failure handlers

This tutorial there will be an explanstion of the current tab. There will also ba a demonstration of its failure handlers. 

This tutorial explains the configuration for the MaNima Pollux. The NTC sensor configuration can be found in this tutorial.

tutorial 10 - Connecting the MaNima Pollux

This tutorial explains how to connect the MaNima Pollux to the MaNima Magnus

 

tutorial 9 -
Using Segments

This tutorial explains the segment function…….

tutoriaL 8 -
Updating with Ethernet

This tutorial explains how to use updating with ethernet…..

tutorial 7 -
Loop Functions

This tutorial explains how to enable loop functions on an already created scene…….

tutorial 6 -
Analog Triggers

This tutorial explains how to enable the analog triggers on the MaNima interface……

 

tutorial 5 -
Digital Triggers

This tutorial explains how to enable and configure the digital triggers on the MaNima interface.

tutorial 4 -
DMX Functions

This tutorial explains how to activate the DMX inputs and DMX outputs…….

 

Tutorual 3 - Synchronized recording and playing

This tutorial explains how to enable synchronized recording and playback on the MaNima interface.

Tutorial 2 - Mapping and Recording digital LEDs

This tutorial explains how to map and record digital (SPI) LEDs…….

 

Tutorial 1 - Connecting the Interface

This tutorial explains how to connect the MaNima Interface to the MaNima Configurator on your computer……..